100% High Quality Dell Vostro 1310 Laptop CPU Cooling Fan
the Dell CPU fan
is fully tailored made according to the original size. Every Dell Vostro 1310 fan should be under strict quality control
leaving the factory, and has passed the authentication of CE, UL, EMC,
Laptop CPU FanCompatible with Part Number: Condition:
Tested to be 100% working properly.Fit Laptop Models: Dell Vostro 1310 Laptop
Dell Laptop CPU Fan 100% Warranty:
Q.C. of Dell Vostro 1310 Laptop CPU Cooling Fan.
* Guaranteed to Meet or Exceed Original Specifications.
* Items are usually shipped within one business day of payment receipt.
How to Replace a Dell Vostro 1310 Fan?
Heat can build up quickly inside of a laptop because of the small
amount of space. The fan ventilates the hot air out of the computer,
allowing the electrical components to work without heat damage. If the
fan on a laptop stops working, it can be replaced with a few tools.
Methods of replacement vary depending on the laptop model, so refer to
the service manual included with your laptop, if necessary. Repair this
problem quickly to avoid overheating and failure of your laptop.
1. Turn off the computer and disconnect any electrical devices.
Remove the battery and ground the computer, according to the service
2. Remove the system board, according to the service manual. The method of removal varies depending on the type of laptop.
3. Disconnect the fan connector, and remove the screws while
holding the Dell Vostro 1310 Fan in place on the system board.
Remove the fan.
4 Place the new Dell laptop fan onto
the system board where the old one was removed. Line up the screw holes.
Use a screwdriver to replace the screws and secure the fan into place.
5 Plug the Dell Vostro 1310 Fan connector into the system board.
6 Assemble the laptop, according to the service manual, and turn it
on. Listen for the Dell Vostro 1310 fan to make sure it runs
This product was added to our catalog on Monday 20 September, 2010.