100% High Quality ACER Aspire 5670 Laptop CPU Cooling FanSpecification:Package Content: 1x CPU Cooling Fan
Compatible with Part Numbers: AB7205HB-EB3Type: Laptop CPU Fan
Condition: Original and New
Warranty: 3 months
Remark: Tested to be 100% working properly.
Product Introduction:Acer Aspire 5670 Fan
are made from highest quality parts, the
Acer laptop fan are tailored
made according to the original size, whether the appearance, size and
quality are the same as with the original. Every Acer Aspire 5670
Fan Cooling Fan should be under strict quality control before leaving the
factory, and has passed the authentication of CE, UL, EMC, CQC,ROHS,
etc.
Fit Laptop Models:ACER Aspire 5600 Laptop,
ACER Aspire 5670 Laptop,
ACER Aspire 5672 Laptop,
ACER TravelMate 4222 Laptop,
ACER TravelMate 4220 Laptop,
ACER TravelMate 4670 LaptopAcer Laptop CPU Fan 100% Warranty:*
100% Q.C. of
ACER Aspire 5670 Laptop CPU Cooling Fan.* Uses the highest quality parts.
*
100% Q.C. of EVERY product. Extended run time.
* 30 Days Money Back.
* Excellent Service.
*
100% compatible with original parts.
How to Replace a Acer Aspire 5670 Fan?1.
Follow your laptop owner's manual and assembly guide carefully as you
disassemble the laptop. Touch something metal periodically to remove
static charge, and work on a large table with a bright light source.
2.
Turn off the laptop and unplug it. Remove the main battery, CD/DVD
drive and the hard drive. The hard drive is usually located in a slot on
one side of the laptop. Remove the screw that holds the cover in place,
then pull out the hard drive sled.
3. Turn the laptop over and
remove the screws on the bottom that hold the keyboard in place. Flip
the laptop over, open it, then lift the keyboard up and out. Unplug the
flexible ribbon cable that connects the keyboard to the motherboard.
4.
Remove the screws that hold the keyboard bezel and palm rest in place.
Carefully pry loose any plastic snaps on the sides, then lift the bezel
and palm rest up and out.
5. Unplug the Acer Aspire 5670
Fan Cooling
Fan. Remove the screws that hold the heat sink and fan in place, then
remove the entire unit from the laptop. Remove any thermal compound
residue from the bottom of the heat sink and the CPU.
6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the
Acer Aspire 5670 Fan back in, then reassemble the laptop.
7.
Plug the laptop in and turn it on. After you use it for a few minutes,
you should hear the new fan running and feel warm air blowing from the
vent on the side of the laptop. A Acer Aspire 5670
Fan does not run continuously, so don't be concerned if the
Acer Aspire 5670 Fan shuts off periodically.
This product was added to our catalog on Wednesday 09 June, 2010.