100% High Quality Apple MacBook Pro A1260 15" Laptop CPU Cooling FanSpecification:Unit: 1x CPU Fan
(Left Side)Type: Laptop CPU Fan
Condition: Brand New
Warranty: 3 Months
Remark: Tested to be 100% working properly.
Product Introduction:Apple MacBook Pro A1260 15" Fan are made from highest quality parts, the
Apple laptop fan are
tailored made according to the original size, whether the appearance,
size and quality are the same as with the original. Every Apple MacBook
Pro A1260 15" Fan Cooling Fan should be under strict quality control
before leaving the factory, and has passed the authentication of CE, UL,
EMC, CQC, ROHS, etc.
Fit Laptop Models:Apple MacBook Pro A1260 15" Laptop,
Apple MacBook Pro A1150 15" Laptop
Apple Laptop CPU Fan 100% Warranty:*
100% Q.C. of
Apple MacBook Pro A1260 15" Laptop CPU Cooling Fan.
* Guaranteed to Meet or Exceed Original Specifications.
* Items are usually shipped within one business day of payment receipt.
How to Replace a Apple MacBook Pro A1260 15" Fan?1.
Follow your laptop owner's manual and assembly guide carefully as you
disassemble the laptop. Touch something metal periodically to remove
static charge, and work on a large table with a bright light source.
2.
Turn off the laptop and unplug it. Remove the main battery, CD/DVD
drive and the hard drive. The hard drive is usually located in a slot on
one side of the laptop. Remove the screw that holds the cover in place,
then pull out the hard drive sled.
3. Turn the laptop over and
remove the screws on the bottom that hold the keyboard in place. Flip
the laptop over, open it, then lift the keyboard up and out. Unplug the
flexible
ribbon cable that connects the keyboard to the motherboard.
4.
Remove the screws that hold the keyboard bezel and palm rest in place.
Carefully pry loose any plastic snaps on the sides, then lift the bezel
and palm rest up and out.
5. Unplug the
Apple MacBook Pro A1260 15" Fan Cooling
Fan. Remove the screws that hold the heat sink and fan in place, then
remove the entire unit from the laptop. Remove any thermal compound
residue from the bottom of the heat sink and the CPU.
6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the
Apple MacBook Pro A1260 15" Fan back in, then reassemble the laptop.
7.
Plug the laptop in and turn it on. After you use it for a few minutes,
you should hear the new fan running and feel warm air blowing from the
vent on the side of the laptop. A
Apple MacBook Pro A1260 15" Fan does not run continuously, so don't be concerned if the
Apple laptop Fan shuts off periodically.
This product was added to our catalog on Tuesday 10 May, 2011.
