Fujitsu Amilo Pro V2030 Laptop CPU Cooling Fan

100% High Quality Fujitsu Amilo Pro V2030 Laptop CPU Cooling Fan

Specification:
Package Content: 1x CPU Cooling Fan
Type: Laptop CPU Fan
Power: DV5V, 0.4A
Condition: Original and new!
Warranty: 3 months
Remark: Tested to be 100% working properly.

Product Introduction:

Fujitsu Amilo Pro V2030 Fan are made from highest quality parts, the Fujitsu laptop fan are tailored made according to the original size, whether the appearance, size and quality are the same as with the original. Every Fujitsu Amilo Pro V2030 Cooling Fan should be under strict quality control before leaving the factory, and has passed the authentication of CE, UL, EMC, CQC,ROHS, etc.

Fujitsu Amilo Pro V2030 Fan Fits Parts NO.

    * AB6505HB-TB3

Fujitsu Amilo Pro V2030 Fan Fits Laptop Model.

    * Amilo Pro L1310G
    * Amilo Pro V2030
    * Amilo Pro V2035
    * Amilo Pro V2055

Fujitsu Laptop CPU Fan 100% Warranty:

* 100% Q.C. of Fujitsu Amilo Pro V2030 Laptop CPU Cooling Fan.
* Uses the highest quality parts.
* 100% Q.C. of EVERY product. Extended run time.
* 30 Days Money Back.
* Excellent Service.
* 100% compatible with original parts.

How to Replace a Fujitsu Amilo Pro V2030 Fan?

1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.

2. Turn off the laptop and unplug it. Remove the main battery, DVD drive , Ac adapter and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive, screen sled.

3. Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.

4. Remove the screws that hold the laptop keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.

5. Unplug the Fujitsu Amilo Pro V2030 CPU Cooling Fan. Remove the screws that hold the heat sink and fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.

6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and cpu cooling fan. Replace the screws, plug the Fujitsu Amilo Pro V2030 Fan back in, then reassemble the laptop.

7. Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new Fujitsu cpu cooling fan running and feel warm air blowing from the vent on the side of the laptop. A Fujitsu Amilo Pro V2030 Fan does not run continuously, so don't be concerned if the Fujitsu Amilo Pro V2030 Fan shuts off periodically.