100% High Quality HP Pavilion dv8000 Laptop CPU Cooling FanSpecification:Unit:
Laptop CPU FanCompatible with Part Number: 410055-001, 413452-001, 418409-001, 407862-001, 414226-001, AD5805HX-TB3 Power:
DC 5V 0.42A
Tested to be 100% working properly.Availability:
Product Introduction:HP Pavilion dv8000 Fan
are made from highest quality parts, the HP laptop fan are tailored
made according to the original size, whether the appearance, size and
quality are the same as with the original. Every HP Pavilion dv8000 Fan
Cooling Fan should be under strict quality control before leaving the
factory, and has passed the authentication of CE, UL, EMC, CQC, ROHS,
Fit Laptop Models: HP Pavilion dv8000 LaptopHP Laptop CPU Fan 100% Warranty:
Q.C. of HP Pavilion dv8000 Laptop CPU Cooling Fan.
* Uses the highest quality parts.
Q.C. of EVERY product. Extended run time.
* 30 Days Money Back.
* Excellent Service.
compatible with original parts.How to Replace a HP Pavilion dv8000 Fan?
Follow your laptop owner's manual and assembly guide carefully as you
disassemble the laptop. Touch something metal periodically to remove
static charge, and work on a large table with a bright light source.
Turn off the laptop and unplug it. Remove the main battery, CD/DVD
drive and the hard drive. The hard drive is usually located in a slot on
one side of the laptop. Remove the screw that holds the cover in place,
then pull out the hard drive sled.
3. Turn the laptop over and
remove the screws on the bottom that hold the keyboard in place. Flip
the laptop over, open it, then lift the keyboard up and out. Unplug the
flexible ribbon cable that connects the keyboard to the motherboard.
Remove the screws that hold the keyboard
bezel and palm rest in place.
Carefully pry loose any plastic snaps on the sides, then lift the bezel
and palm rest up and out.5. Unplug the HP Pavilion dv8000 Fan Cooling
Fan. Remove the screws that hold the heat sink and fan in place, then
remove the entire unit from the laptop. Remove any thermal compound
residue from the bottom of the heat sink and the CPU.6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the HP Pavilion dv8000 Fan back in, then reassemble the laptop.7.
Plug the laptop in and turn it on. After you use it for a few minutes,
you should hear the new fan running and feel warm air blowing from the
vent on the side of the laptop. A HP Pavilion dv8000 Fan does not run continuously, so don't be concerned if the HP Pavilion dv8000 Fan shuts off periodically.
This product was added to our catalog on Wednesday 09 June, 2010.