100% High Quality IBM ThinkPad X200 Laptop CPU Cooling Fan and Heatsink
Specification:Package Content: 1x CPU Cooling Fan
Type: Laptop CPU Fan
FRU P/N: 44C9549
Condition: Original and New
Warranty: 3 Months
Remark: Tested to be 100% working properly.
Product Introduction:IBM ThinkPad X200 Fan
are made from highest quality parts, the IBM laptop fan are tailored
made according to the original size, whether the appearance, size and
quality are the same as with the original. Every IBM ThinkPad X200 Fan
Cooling Fan should be under strict quality control before leaving the
factory, and has passed the authentication of CE, UL, EMC, CQC, ROHS,
etc.Fit Laptop Models:IBM ThinkPad X200 Laptop,
IBM ThinkPad X200S Laptop,
IBM ThinkPad X200T LaptopIBM Laptop CPU Fan 100% Warranty:
*
100% Q.C. of
IBM ThinkPad X200 Laptop CPU Cooling Fan and Heatsink.* Guaranteed to Meet or Exceed Original Specifications.
* Items are usually shipped within one business day of payment receipt.
* We guarantee
100% satisfaction!
How to Replace a IBM ThinkPad X200 Fan?1.
Follow your laptop owner's manual and assembly guide carefully as you
disassemble the laptop. Touch something metal periodically to remove
static charge, and work on a large table with a bright light source.2.
Turn off the laptop and unplug it. Remove the main battery, CD/DVD
drive and the hard drive. The hard drive is usually located in a slot on
one side of the laptop. Remove the screw that holds the cover in place,
then pull out the hard drive sled.3. Turn the laptop over and
remove the screws on the bottom that hold the keyboard in place. Flip
the laptop over, open it, then lift the keyboard up and out. Unplug the
flexible ribbon cable that connects the keyboard to the motherboard.4.
Remove the screws that hold the keyboard bezel and palm rest in place.
Carefully pry loose any plastic snaps on the sides, then lift the bezel
and palm rest up and out.5. Unplug the IBM ThinkPad X200 Fan Cooling
Fan. Remove the screws that hold the heat sink and fan in place, then
remove the entire unit from the laptop. Remove any thermal compound
residue from the bottom of the heat sink and the CPU.6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the IBM ThinkPad X200 Fan back in, then reassemble the laptop.7.
Plug the laptop in and turn it on. After you use it for a few minutes,
you should hear the new fan running and feel warm air blowing from the
vent on the side of the laptop. A IBM ThinkPad X200 Fan does not run continuously, so don't be concerned if the IBM ThinkPad X200 Fan shuts off periodically.
This product was added to our catalog on Wednesday 09 June, 2010.
