100% High Quality Toshiba Satellite C655-S5142 Keyboard Specification:Layout: US
Letter: English
Regulatory Approval: CE, UL
Condition: Original and new
Color: Black
Warranty: 6 months
Remark: Ribbon cable included
Availability: in stock
Product Introduction:Brand New Keyboard with ribbon cable, 100% manufacturer compatible, Each
Toshiba Satellite C655-S5142 Keyboard is tested before shipping and are 100% working.
Compatible with P/N:
NSK-TN0SC, 6037B0047802, 9Z.N4WSC.001, 9Z.N4WSV.001, K000097450, K000097460, K000098730, MP-09N13US-698, NSK-TN0SV, V114302CS1 US Fit Laptop Models:Toshiba Satellite C655-S5142 LaptopToshiba Satellite C655-S5142 Keyboard Repair and ReplacementAre you considering
laptop keyboard
repair? You might think twice if you happen to be the lucky owner of a
laptop, because replacing the keyboard rather than repairing it could be
a lot less expensive. Laptop keyboard replacement on this particular
model is very easy and takes just a few minutes. Here is a quick
Toshiba Satellite C655-S5142 Keyboard repair tutorial with step-by-step instructions.
Once you have purchased the
new keyboard,
all you need to replace the old with the new is a screwdriver and
something plastic, flat and thin like a credit card or guitar pick.
Step one: Remove the two screws from the bottom of the computer that are holding down the
Toshiba Satellite C655-S5142 Keyboard Black bezel. The bezel is the bar that sits right above all the function keys.
Step
two: Turn the computer over, open the cover and insert the credit card
or guitar pick between the bezel and the laptop screen. The bezel has
pegs that sit in holes, you need to slowly pry up the bezel. It will
make a bit of a popping noise as it is removed.
Step three: Now hold on to the
laptop keyboard
from the end closest to the screen and gently pull it away from the
touch-pad end and flip it over. You will see the ribbon attached to the
underside of the
Toshiba Satellite C655-S5142 Keyboard.
There is a little plastic connector holding the ribbon to the computer.
To unlock it, carefully pull up on the two tabs; one located on each
corner of the connector. Be very gentle when you do this as this is the
one part that gets broken the most often when changing a keyboard. The
ribbon cable will now be released.
Step four: Carefully pull the ribbon out of the connector and remove it along with the entire
Toshiba laptop keyboard.Final step: To insert the new
Toshiba Satellite C655-S5142 Keyboard,
place the board face down so you have easy access to the ribbon. Make
sure the keyboard is lined up so when you flip it back over the keys are
in the correct position. Keep the ribbon straight at all times;
twisting it could damage it. Place the ribbon in the connector; it only
goes in one way. Once in place, push down on the connector tabs to lock
it. Now flip the keyboard over and slide it down toward the touch pad
and take the bezel and line the pegs up with the holes and push it in
place. Then turn the computer over and replace the two screws you
removed from the bottom. You can now power on your computer and see if
the
Toshiba Satellite C655-S5142 Keyboard works. If it is not working, more than likely the ribbon was not inserted properly.
This product was added to our catalog on Wednesday 25 January, 2012.